Seatbelt Holder | Easy Peel & Stick Install | Anti-Flap Seatbelt | Customizable Image Color

Stop the Flap — Keep Your Seatbelt Neat and Secure

Driving with the top off, doors off, or windows down? These 3D printed seatbelt holders keep your belt tucked in place so it stops flapping and flopping while you cruise. Add a custom image and color accent to match your style.

Check Before You Order

• Confirm you have a flat surface near your seatbelt to mount to
• Confirm there's enough clearance between the mount and the seat so it won't interfere

Fits
Any vehicle with a flat, in-line mounting surface near the seatbelt.

Choose Your Quantity

• 1 pc = Right (Passenger) side — want Left (Driver) instead? Note it in Personalization
• 2 pc = 1 Right + 1 Left
• 3 pc = Select 1 pc + 2 pc
• 4 pc = Select two 2 pc sets

Customization

• Retainer base: black
• Choose your image and accent color
• Colors may vary from factory options
• Want something custom? Select the Custom option and enter your request in the Personalization field. If we can't fulfill it, we'll reach out and issue a full refund.

Installation — Only Install Above 50°F / 10°C

1. Clean the install area with soap and water
2. Wipe with rubbing alcohol and let fully dry
3. Peel the tape backing off the retainer
4. Place the retainer exactly where you want it, behind the seatbelt
5. Press firmly and hold for 1 minute
6. Let adhesive cure for 24 hours before use
7. Slip your seatbelt into the rear slot
8. Push the metal seatbelt latch into the front latch hole

Stick it right the first time — the adhesive is very strong and won't be as effective if repositioned.

Materials

• 3D printed ABS plastic
• Heat resistant up to 188°F / 87°C
• Minor surface imperfections are normal with 3D printing

Returns
Because each item is made to order, we do not accept returns or exchanges.